When building USB HDD/SSD in a uEFI boot system by using Windows PE-based BE builder, the recovery volume becomes RAW and unbootable.

Published: 2022/01/27
Updated: 2022/01/27

Summary

When USB HDD/SSD is built by using AIP Windows PE-based BE builder on uEFI boot system and when rebooting the system, the file system of the recovery volume is RAW.

Causes

This is a known issue.

Workaround

Run “diskpart” command to automatically restore the recovery volume.
1) Run “diskpart” command from command prompt.

2) Please make sure that the recovery volume is RAW by using “list volume”.
In this example, the recovery volume of Volume 1 meets the definition of this issue.

DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info

Volume 0 C NTFS Partition 952 GB Normal Boot
Volume 1 RAW Partition 499 MB Normal Hide
Volume 2 FAT32 Partition 100 MB Normal system
Volume 3 NTFS Partition 895 GB Normal Hide

3) Run “automount enable NOERR”.
DISKPART> automount enable NOERR
Auto-mount of a new volume is enabled.

4) Reboot the system.

5) Run “diskpart” and make sure that the recovery volume is restored.

DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info

Volume 0 C NTFS Partition 952 GB Normal Boot
Volume 1 Restore NTFS Partition 499 MB Normal Hide
Volume 2 FAT32 Partition 100 MB Normal System
Volume 3 NTFS Partition 895 GB Normal Hide

Target Product

– ActiveImage Protector 2018

?akb&p=3561